FOX RX+ BITE ALARM

  • Sealed water-resistant case
  • Digital circuitry
  • D-Tec™ Plus Sensing Bite Detection System (DTSS)
  • Low battery consumption
  • Tru-Run™ caster obtained by CNC numerically controlled machine
  • Dual multi-color LEDs (Red, Green, Blue, Orange, Purple and White)
  • On/off switch with two operation modes (day and night)
  • When set to night mode, both LEDs will provide dim illumination of your chosen color
  • High quality conical speaker
  • 3/8" stainless steel threaded element
  • Rubber inner support lining to safeguard the reeds
  • Adjustable volume via ergonomic selector switch, with level index (8 different levels with the lowest corresponding to the completely silent beacon)
  • Tone of sound adjustable via ergonomic dial, with level index (8 different tones; higher tones by turning dial clockwise, lower tones by turning dial counterclockwise)
  • Intelligent Sensitivity level control with False Bite Elimination function via ergonomic selector switch (8 different sensitivity levels - see below for comparative sensitivity table versus NTX-R model)
  • Range Test function, allows the user to check the useful range of the transmission range between the RX+ Receiver and the Micron RX+ Beacons
  • Low battery alarm (LED color changes to cyan indicating it is time to replace batteries)
  • Connector with power output (2.5mm) for use with illuminated Swingers
  • Supplied with two compression washer options: hard and soft, with an additional soft spare washer for each unit
  • Requires 2 AA batteries

Improved features compared to the NTX-R model

  • Deeper ears without increasing the height of the beacon
  • Dual multi-color LEDs, one per ear, on the top of the ear
  • External control of the multi-color LEDs using the Colour Sync™ function; the color is variable simply by pressing a button on the battery compartment cover
  • Manually selectable Day and Night modes
  • External control of Vari-Bright LED brightness adjustable to suit fishing conditions (choice of 3 LED brightness levels in Day mode and as many LED brightness levels in Night mode) by simply operating a button on the battery compartment cover
  • Wide space around the caster and better water drainage dramatically reduce the chances that the caster can get stuck due to ice in extreme cold conditions
  • Improved performance in terms of useful transmission range with RX+ receiver
  • Improved sensitivity range (see below)

Sensitivity Control

In all sensitivity levels (except maximum), the wire must travel the specified distance in the same direction within 2 seconds to activate the unit. Any movement in the opposite direction will reset the distance counter to zero. This operation essentially reduces or eliminates false bites caused by wind or water movement.

RX+ Wire Movement NTX-R Wire Movement

Setting 1 (Min) 90mm 74mm

Setting 2 73mm 56mm

Setting 3 56mm 48mm

Setting 4 34mm 40mm

Setting 5 17mm 32mm

Setting 6 11mm 24mm

Setting 7 5.6mm 16mm

Setting 8 (Max) 2.8mm 8mm

ART. CEI159

VIEW ALL OUR PRODUCTS IN THE CATEGORY FOX HORNS

6 Items

16 other products in the same category:

Product added to compare.