Fox carpfishing article

PRODUCT OVERVIEW

  • Ultra-Long Range™
  • Digital circuitry
  • Low battery consumption
  • Indication of battery status when the receiver is turned on (4 green LEDs indicate new or well charged batteries, 3 green LEDs indicate batteries have been used but do not need replacement, 2 orange LEDs indicate batteries are starting to be low, 1 red LED indicates batteries are low and need replacement)
  • Low receiver battery alarm (LEDs will flash cyan periodically indicating that batteries need to be replaced)
  • Low beacon battery alarm (when a Micron RX+ has low battery level, then the receiver LED corresponding to that particular beacon will switch to cyan color)
  • Vibration alarm function (can be set via switch on the back)
  • Light function from Bivvy (can be set via switch on the back, see below for details)
  • Anti-theft system
  • Easy RX+ Micron registration (via switch on the back)
  • Indication LEDs with Colour Sync™ function
  • On/Off knob & volume adjustment
  • High quality conical speaker
  • Fastening point for carrying lace
  • Requires 3 AA batteries

Improved features compared with the NTX-R receiver unit

  • Wider indication LED windows, visible from both the front and top of the receiver
  • Optional light function for the bivvy in case of biting warning
  • Design that allows it to remain upright when placed on a coffee table or bucket lid
  • Soft touch case
  • Ability to synchronize up to 8 Micron RX+
  • Better performance in terms of radio communication
  • Silent ON mode, with all receiver functions enabled but no sound in case of a bite

Bivvy light function

When the bivvy light function is activated by means of the switch on the back of the receiver, the receiver will behave in the following modes

  • The receiver indication light will be dimmed to prevent too much of it from being emitted while the bivvy light is on
  • The bivvy light will be activated if at least three Micron RX+ wheel movements are detected in rapid succession, to prevent false indications from unnecessarily turning on the bivvy light
  • The bivvy light will illuminate to full brightness and remain lit while the beacon continues to send signals to the receiver. The light will be turned off 5 seconds after the receiver has received the last signal from the beacon and no other indication is received

ART. CEI160

6 Items

16 other products in the same category:

Product added to compare.