• Out-of-Stock

Black Cat BOAT TENT AIRFRAME

Black Cat Boat Tent Air Frame is a luxurious boat tent that fearlessly defies wind and weather.

This tent is the successor to the innovative Black Cat Boat Cave II; it features a new super strong and durable structure made of air chambers that inflate at high pressure.

These chambers have a design that makes them cross over each other and are reinforced, ensuring extreme stability when traveling in strong winds and storms.

The sheet, with a 5000 mm hydrostatic column, is located on the outside of the inflatable frame while the inner anti-condensation membrane is attached to the inside of the frame.

This optimizes the usable volume by limiting the external dimensions. The two side walls have new fixed transparent windows, which can be covered with an outer sheet. Each window is protected by a canopy reinforced with fiberglass hoops. These awnings effectively keep rainwater away from the windows. With its dimensions of 3.4 m in length and an average width of 2 m, Boat Cave 3.0 is suitable for almost any boat, while the various attachment points (D-Rings) allow for secure and flexible fastening. The optimal boat width is 2 m.

The center-opening entrance door has been improved with an emergency exit system to quickly exit the tent if needed. Velcro pockets are still sewn across the entire inside width of the door and allow placement of weights to reduce slamming.

Large windows in the entrance wall allow you to keep an eye on your surroundings. It is possible to leave only the mosquito nets in place of the windows depending on weather conditions. The bow door has been fitted with a Velcro edge for a better seal. This door also has a large window that can be closed from the outside. The bow area is optimally protected by a reinforced canopy to ensure a clear view. The awning in the aft area has been upgraded with a fiberglass pole, like the windows, to fit the inflatable frame, and can be rolled up and attached to the awning with Velcro closures.

With dimensions of 3.4 m in length and an average width of 2 m, the Boat Cave 3.0 fits almost any boat, while its various attachment points (D-Rings) allow for secure and flexible attachment. The optimum boat width is 2 m.

ART. 9989001

16 other products in the same category:

Product added to compare.