SEATEC EVO AIR

APPLICABLE TO OLEOPNEUMATIC GUNS WITH 13mm INTERNAL BARREL. USE:

1) LOADING - THE ROD IS INSERTED INTO THE SHOE WITH THE SHOE FULLY SCREWED BY HAND The o-ring has a diameter equal to that of the rod and is therefore pushed by the ring nut into a narrower seat which, by compressing it, makes it watertight.

2) STAND-BY - UNscrew the ferrule by one turn and wait in this position until the moment of pulling. Once the rod is loaded, the o-ring remains in the tight position, continuing to generate a watertight seal. It is left in this position until the moment of firing.

3) SHOOTING - PRESSING THE ROCK Thanks to the MOBILE o-ring, friction becomes non-existent. At the moment of firing, the rod immediately pulls the o-ring into the wide seat, the o-ring expands and assumes the same diameter as the rod, which will no longer friction on it.

ADVANTAGES: INCREASE OF POWER: zero friction, therefore maximum rifle performance, reduced wear of the gasket, no need for lubrication - BETTER ASSET - REDUCTION OF NOISE: the rod does not slide on metal parts - Hand unscrewable ring nut, therefore quick replacement of the o-ring - GREATER HYDRODYNAMICITY: thanks to the use of "naked" rod

ART. EVO125